# North Shore / Print revision 01

**Prototype — physical fit untested.** UI version 07 does not change the geometry.

Print revision 01 includes terrain and integral buildings with flat roof caps. Browser roof detail and illustrative proposal geometry do not change this file. Redevelopment inserts are not included. Print the fit tests before expanding the assembly.

1. Read `assembly-guide.pdf` and `START_HERE-source.md`.
2. Start with the fit-test ZIP: one carrier coupon, one D4.3 receiver coupon, and **two printed copies** of the nominal pin STL.
3. After checking fit, use the first-join ZIP: B04 and C04, two carriers, four printed pins and one alignment bridge. Nominal purchased hardware: eight 6 x 2 mm magnets and eight 10 x 1 mm steel pads. Check actual fit and retention.
4. Individual terrain STLs can be printed on their own. Full-set ZIP contains 32 tiles including D01; compatible hardware is in the separate hardware ZIP.

Slice at 100% using millimetres, underside Z=0. The model scale is 1:2,500 in all directions. Change connector fit locally; scaling a terrain tile changes its geography. No tested printer/material/slicer profile, accepted tolerance or strength claim is included. Required sliced volume with supports/brim remains pending. Source digital topology reports are linked to the published bytes by their SHA-256; physical results are recorded separately as untested.

The source package has 4,753 building occurrences across print tiles, representing the same 4,485 unique records as the browser. A seam-crossing building appears in each print tile it intersects.

## Verification

`manifest.json` is the complete release catalog, including ZIP bytes and hashes. `checksums.sha256` covers the release files except itself. Each ZIP includes `manifest-files.json`, its own content checksums, docs and the required mesh files. Print quantities are listed in `bundle.json`; a reused pin STL is stored once. This avoids circular hashes inside a ZIP that describes its own external checksum.

## Terms

Mike Perina / 3dstaten.nyc, CC BY-NC 4.0. Preserve attribution, link the license and identify changes. Underlying public data and third-party rights remain with their respective sources. See LICENSE.txt, ATTRIBUTION.md and THIRD_PARTY_NOTICES.md.
